We continue to narrow down choices on what is going where. Next up is a meeting with the electric company to see just what is available. Current service is 200A, the transformer has 400A. EV chargers and 180 degree dishwashers amperage totals add up fast.
Author: The Sage
The Kitchen Takes Shape
Neika is here!!!!! We are so happy our friend from totally back in the day is in town to share in the Sage’s makeover and add her marvelosity. Neika brings experience as an Executive Chef along with other superpowers including the ability to facilitate a project or process getting from here to there. She arrived on the evening of March 17 and we presented The Plan to Michael Bertin on March 21 at 2PM. We were back and forth, in and out, marking and moving all weekend. Total fun.
And so with further ado and no gilding the lilly, check out the kitchen plan!! We had such a great time. In this masterpiece one can find the Chocolate Studio, Bakery, Coffee/Gelato/Soda Fountain, Bench seating in the old office, the to be build central table, stairs to the Mezzanine, Hot Food Prep, Cold Food Prep, Wash Room, Walk In Refrigerator & Freezer, Waldo, Mop Sink, 4 Hand Wash Sinks, a Vegetable Wash Station, Hot and Cold Pickup Locations, 4 Speed Racks, the Masonry Heater, Dry Storage (with the standalone refrigerators), and, at long last, where the Mechanical Room will be.
Inventory is well underway, appliances are being reviewed and given attention, and what is needed being itemized. We may have located a combi oven in Taos. Fingers crossed.
Strong Bones
We are moving along. The photos below show the continuing work on the mezzanine. Yesterday materials arrived for the west side of the roof extension which is going to have a lower ceiling than the mezzanine.
Rejuvenation and Exfoliation
Coming and Going
Here are recent perspectives on the interior demo state. We are closing in on the end. One of the last areas is removing the rest of the old roof seen on the left in the lower of the two photos. At the moment the bare 2x are visible as the drywall and insulation have been taken out. The plywood path seen in the same photo on the floor covers the mostly filled trench containing the incoming air duct for the masonry heater which can be seen holding up one pair of the scaffolding wheels.
Getting Ready for The Pour
Deconstruction of the Inner Roof
Some photos showing the original roof which was covered over when the patio was turned into indoor space. Notice the sistered 2x8s attached to the rafters keeping the current exterior from collapsing. The main dining room gets this treatment next.
Demo Days
Demolition of the restaurant proper is underway. The first surprise was finding that all the bricks, meaning those in the Garden Room and Main Dining Room are simply sitting on sand, explaining why the floors were so cold.
One of the requirements for the Temp-Cast masonry heater is a 2″x15″ duct bringing in outside area. With the heater essentially centered in the building, this means about 25 feet of ducting to simply get to the outside. Being able to pop up the bricks and not have to cut through a slab is welcome.
No slab will make installing radiant heat in the dining areas much easier too. Out come the bricks, then some lite digging, 2″ of rigid foam and before you know it we are walking on pex in concrete.
Excavation of the legacy roof is also underway from inside the building. The exposed sections show that, like the Grand Canyon, the building has layers, and there will need to be many supports put in place to keep what ought to be kept where it ought to be.
Introducing the Apartment
On the west side of the restaurant is an apartment. The outbuilding used by Fred and Isaline blocks it some. There was a set of sliding glass doors through which passage to and from the Green Room, the southernmost dining area with all the plants, was possible. It is the first place to benefit from construction.
How is there construction at all? Not joking: out there in the multiverse is one where we are doing all of it. Let’s collectively take a breath and be glad that isn’t the case. Back in this universe, Mary actually was out last fall and simply met Dorell Drake of Drake Construction somewhere and asked if he knew any contractors. That simple.
Well fast forward to January and don’t fall down when you learn that Dorell referred Brett Buchanan who it seems knows all kinds of folks and suddenly we have a crew here on the regular. We are thankful and honored to have this interest and attention from Dorell and Brett.
Here are some photos of what was and where we are now. Ultimately, it’ll be a 2 bedroom with the door on the north currently leading to the courtyard is being moved to the west wall which is also getting a set of sliding doors.
Some Like It Hot
The idea is to construct a masonry heater in the main dining area. While the black outline looks suspiciously like an outhouse, rest assured it is the current and longest champion answer to the key question of where the masonry heater ought to go. The glass doors are going to face the main dining area accessed from the front doors. The black oven faces in towards the kitchen for hopefully making roasts, pies, breads. Maybe couches around the heater? Who can predict the future anyway,
These things are basically radiant wonders. You have a burn in the AM and a second at night; the rest of the time the chimney is closed. As it is a black oven, the professionals will typically wait until the fire is over and start their deeds of wonder. The rest of us bask in its warmth and smell the ensuing goodness.
We are talking to Fyrepro out of Ft. Collins to build a Temp-Cast core masonry heater. Using a kit takes the guesswork out; this is an expensive and immoveable decision. Fyrepro comes with the core and provided there is a 12″ slab plus a 2″x15″ external air intake waiting, the 22 1/2″x36″ core will be put together not more than 4 days. The whole thing will be about 8000 lbs. It’ll be a long chimney as it has to be higher than the roofline which is in talks about getting still higher. More on that some other time. The chimney itself comes out of the L or R sides; it is asymmetrical. There can be a pair of 30 degree bends in the approximately 10″ exterior diameter chimney should the symmetry as drawn be the right thing to do. The heater is then covered in cardboard and that stage is complete though the unit is not yet ready for service until the exterior cladding is also finished.
The exterior cladding is what we see and apparently a free-standing structure of its own, built over the yet to be well desiccated cardboard. It must be freestanding for crack’s sake as the masonry used to build the core will expand at a different rate than the cladding. Now we all know the plethora of extraordinary rocks in this area. The BTA itself contains gazillions. How about cutting some of them into bricks for the façade? Well that is the plan folks.